Series 2000 Electric Actuator

The EIM Series 2000 Electric Actuators offer a wide power range for both Multi-Turn and Part-Turn Valve applications to meet every conceivable operational specification. Multi-turn applications up to 10,000 ft-lb. (13,600 Nm) of Rotary Torque, and 350,000 LB (1,560 KN) of Linear Thrust with Stem Acceptance up to 6.0 inch (152 mm). Output Speeds from 3 to 250 RPM. Part-Turn applications up to 150,000 ft-lb. (203,000 Nm) of Rotary Torque with Stem Acceptance up to 12.0 inch (305 mm). Operating times from 5 to 900 seconds. Motors are suitable for a wide range of Power Supply ranging from:

* 3 Phase / 50 or 60 Hz / 200 through 575 Volts
* 1 Phase / 50 or 60 Hz / 115 through 230 Volts
* 12 through 125 Volts D.C.

Certified for severe Service Applications such as:
* Ambient Temperatures of -60 degrees to + 170 degrees F (-50 to +75 degrees C).
* Temporary Submergence to European Standard IP68
20 Ft. Head Water for 72 Hours -or-
50 Ft. Head Water for 24 Hours

Explosion Proof Electrical Enclosure Certifications:
* F. M. (factory Manual):
Class I, Group B, C, & D, Division 1
Class II, Group E, F, & G, Division 1
C.S.A. (Canadian Standards), Class 1, Group C & D, Division 1
CENELEC (Europe), EEx IIB T4

Outdoor Above Ground Electrical Enclosures Listings:
* Watertight, NEMA 4X, IP66

EIM Controls, 13840 Pike Road, Missouri City, TX 77489-1005. Tel: 281-499-1561; Fax: 281-499-8445.