Oil/Water Separator

The Model ACE-10 HI-RISE LLS™ Liquid/ Liquid separator has no moving parts and removes floating tramp oils from soluble coolant and process water sumps. This unit is self-contained and separates jet fuel from water. It is completely portable and uses an air-operated diaphragm pump for intrinsic safety.

400 gallons of recovered oils may be stored in the separator. HI-RISE LLS systems have no minimum flow requirements and will handle any floating fluids on another fluid carrier. No electrical energy is required for separation.

The systems work well with high or low temperature fluids and have optional provisions for solar and steam heating to permit operation in low-temperature environments.

The system has minimal maintenance, needing only replacement of critical wear parts for the pump and the occasional cleanout of collected solids.

A standard attachment for removing hazardous liquid wastes from barrels is included with the equipment package, as well as a Hunter Oil Skimmer for the inlet sump.

Models are available for high and low pressures, temperatures, and hazardous liquid/liquid separations with flow ranges from zero to 1,000 gpm.

Action Engineering, Inc., PO Box 505, Temple City, CA 91780-0505. Tel: 626-447-8111; Fax: 626-447-8112.