Product/Service

GP Gas and Steam Filters

ADAMS GP Filters for air, gas or steam prevent clogging and friction wear caused by dirt, rust, pipe scale and other contaminates present in the stream
ADAMS GP Filters for air, gas or steam prevent clogging and friction wear caused by dirt, rust, pipe scale and other contaminates present in the stream. The unit operates in two stages; first, by directing flow tangentially around the tube element and against the inside wall, providing centrifugal separation of larger particles and droplets, (contaminants are captured in patented vertical slots located on filter's side walls) and second, by diffusing the gas through a permanent tube element to achieve maximum filtration. A gas flow interrupter at the bottom of the unit improves draining efficiency and reduces condensate pick-up from liquid collected before the drain.

R.P. Adams provides two types of permanent tube elements:

PORO-STONE TUBE ELEMENT PORO-CARBON TUBE ELEMENT
5 micron filtration

Used for air and gas streams

Meets ASME Code Section VIII, Div. 1

Designed for pressures up to 500 PSIG

Designed for temperatures up to 650oF		 2 micron filtration

Used primarily for steam flow

Meets 3A standards for culinary streams

Meets ASME Code Section VIII, Div. 1

Designed for pressures up to 400 PSIG

Designed for temperatures up to 500oF


BENEFITS AT A GLANCE:

  • Available in sizes from 1/2" to 6"
  • Two-step separation process
  • Permanent tube element provides greater durability than paper, polyester cloth or wire screen
  • Tube elements can be cleaned and reused, saving money
  • Low pressure drop across filter
  • In-line process connections for easy installation and use
  • Made of cast ductile iron construction or stainless steels
  • Rugged design and construction for long-term reliability
  • Meets 3A standards for Culinary Steam as outlined by the Dairy and Food Industries Supply Association
  • Meets Section VIII, Division 1 of the ASME Code