Product/Service

Fiberglass Baffle Wall Systems

Enduro's fiberglass baffle systems are pre-engineered structural walls and columns specifically designed for submerged flow control applications in potable water and waste treatment facilities.
Enduro's fiberglass baffle systems are pre-engineered structural walls and columns specifically designed for submerged flow control applications in potable water and waste treatment facilities. Lower in overall installation cost, Enduro baffles are packaged as kits and are erected significantly faster than conventional concrete and concrete block systems.

SUBMERGED FLUID CONTROL TOOL FOR:

  • Excessive Water Residence Times
  • Recirculation Zones ("Dead Spots")
  • NSF Requirements
  • Maximizing T10 times to lower DBPs ("Disinfection By-Products")
  • Hydrodynamic Short Circuiting
ALTERNATIVE TO:
  • Redwood
  • Concrete Walls
  • Concrete Block (CMU)
  • Fabric Baffles
APPLICATIONS INCLUDE:
  • Clearwells / Storage Reservoirs - Washington, D.C.
  • Contact Basins - New Orleans, LA
  • Flocculation Basins - Philadelphia, PA
  • Distribution Channels - Houston, TX
PERFORMANCE CAPABILITIES:
  • Single spans up to 25 ft. & over
  • Diffused / Perforated Systems
  • Removable Wall Systems
  • Water Differentials up to 2 ft.
  • Certified Load / Span Data
  • Packaged as Erection Kits
ELIMINATES FOUNDATION CRACK CONCERNS
Enduro's baffle system weighs less than 6% of what a concrete or CMU baffle system would weigh in the same profile. Due the dead load reduction on concrete foundations, the potential for water leakage through new or existing basin foundation cracks is significantly reduced.

DESIGN ASSISTANCE:
On each project, our staff of design professionals provides you with a wide range of services:

  • FREE Preliminary Design Drawings (no obligations)
  • Specification Assistance
  • Developing Budget Costs
  • Complete Construction Drawings (sealed by Professional Engineer)
TO REQUEST INFORMATION:
Please contact us at enduromaster@endurosys.com or call us at 1-800-231-7271.

Enduro Systems, Inc., Composite Products Division, 7100 Old Katy Road, Houston, TX, 77024. Phone: 713-358-4000; Fax: 713-358-4100.